Impact Crushers

Requip stock and supply the following parts:
Blow bars, hammers, impact plates, liner plates, bearing housings, replacement rotors, replacement impact aprons, front locking pieces, springs and bolts.

Requip can supply blow bars in a variety of materials to suit all application as follows:

Manganese Steel - will work harden, good resistance to shock loading, low resistance to wear

Application - crushing primary rock recycling

Martensitic low alloy steel - higher initial hardness, good resistance to shock loading, medium resistance to wear

Application - Crushing primary rock recycling with reinforcement

High Chrome IRON 24/28% - very good resistance to abrasion, large feed sizes and tramp metal to be avoided.

Application - secondary crushing of abrasion stone

Martensitic low alloy steel with wear resistant inserts - suitable for crushing all material, good resistance to shock loading, good wear resistance

Application - crushing of recycling of concrete with reinforcement and asphalt

WE CAN SUPPLY THE RIGHT PARTS FOR YOUR APPLICATION

The above descriptions are for guidance only. The selection and suitability of each blow bar material should be ascertained by the operator of the crushing machine according to the prevailing conditions.

The use of any manufacturers name, machine model or part numbers are for reference purposes only and does not infer that any parts are from the original manufacturer. Requip Supplies Ltd are not affiliated with any of the manufactures listed.